Replacing The Power-Adapter Port; Procedure; Post-Requisites - Dell XPS 15 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Place the power-adapter port into the slot on the palm-rest assembly.
2 Route the power-adapter port cable through its routing guides on the palm-rest assembly.
3 Replace the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
4 Connect the power-adapter port cable to the system board.
Identifier
Status

Post-requisites

1 Replace the display assembly.
2 Replace the battery (half-length)
3 Replace the base cover.
GUID-A99140DB-7AF3-4218-B305-532FF94DF51D
Released

Replacing the power-adapter port

computer. After working inside your computer, follow the instructions in
GUID-6573CEC9-6601-4D86-B746-449414FF1856
Released
GUID-F0710676-729E-43A4-BC18-2F7005354246
Released
or the battery (full-length).
After working inside
www.dell.com/
Replacing the power-adapter port
40
77