Replacing The Coin-Cell Battery; Procedure; Post-Requisites - Dell XPS 15 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Adhere the coin-cell battery to the system board.
2 Connect the coin-cell battery cable to the system board.
3 Turn the system board over.
Identifier
Status

Post-requisites

1 Replace the system-board
2 Replace the memory modules.
3 Replace the heat sink.
4 Replace the fans.
5 Replace the solid-state drive (half-length)
6 Follow the procedure from step 3 to step 6 in
7 Replace the wireless card.
8 Replace the battery (half-length)
9 Replace the base cover.
60

Replacing the coin-cell battery

GUID-5E22F4A0-F01F-4522-8155-BE22A8CA6E5F
Released
Replacing the coin-cell battery
computer. After working inside your computer, follow the instructions in
GUID-A26355E1-1177-48A1-86DE-85C0637849C0
Released
GUID-4EB5EDC2-D30F-4CBF-A7C9-99B10F18D946
Released
assembly.
or the solid-state drive
"Replacing the hard
or the battery (full-length).
(full-length).
drive".
30
After working inside
www.dell.com/