TRENDnet User's Guide
Exposure Settings
If the camera is equipped with the fixed lens, only Manual is selectable,
and the iris mode is not configurable.
The Exposure Time refers to the electronic shutter time, which ranges
from 1 to 1/100,000s. Adjust it according to the actual luminance
condition.
Day/Night Switch
Select the Day/Night Switch mode according to different surveillance
demand.
Day, Night, Auto, Scheduled‐Switch, and Triggered by alarm input are
selectable for day/night switch.
Day: the camera stays at day mode.
Night: the camera stays at night mode.
Auto: the camera switches between the day mode and the night mode
according to the illumination automatically. The sensitivity ranges from
0 to 7, the higher the value is, the easier the mode switches. The filtering
© Copyright 2019 TRENDnet. All Rights Reserved.
time refers to the interval time between the day/night switch. You can
set it from 5s to 120s.
Backlight Settings
BLC Area: If you focus on an object against strong backlight, the object
will be too dark to be seen clearly. BLC compensates light to
in the front to make it clear. OFF, Up, Down, Left, Right, Center, Auto, and
Custom are selectable.
Note: If BLC mode is set as Custom, you can draw a red rectangle on the
live view image as the BLC area.
WDR: Wide Dynamic Range can be used when there is a high contrast of
the bright area and the dark area of the scene.
White Balance
White balance is the white rendition function of the camera used to
adjust the color temperature according to the environment.
Image Enhancement
Digital Noise Reduction: DNR reduces the noise in the video stream. OFF,
Normal and Expert are selectable. Set the DNR level from 0 to 100 in
Normal Mode. Set the DNR level from both space DNR level [0‐100] and
time DNR level [0‐100] in Expert Mode.
TV‐IP345PI
the object
40