TRENDnet User's Guide
Security
Authentication
Configure the parameters, including Authentication, Anonymous Visit, IP
Address Filter, and Security Service from security interface.
1.
Enter the Authentication interface: Configuration > System > Security >
Authentication.
2.
Set up authentication method for RTSP authentication and WEB
authentication.
Caution:
Digest is the recommended authentication method for better data
security. You must be aware of the risk if you adopt basic as the
authentication method.
3.
Click Save to save the settings.
© Copyright 2019 TRENDnet. All Rights Reserved.
IP Address Filter
1. Enter the IP Address Filter interface: Configuration > System > Security >
2. Check the checkbox of Enable IP Address Filter.
3. Select the type of IP Address Filter in the drop‐down list, Forbidden and
4. Set the IP Address Filter list.
IP Address Filter
Allowed are selectable.
Add an IP Address
Steps:
(1) Click the Add to add an IP.
(2) Input the IP Adreess.
(3) Click the OK to finish adding.
TV‐IP345PI
22