Table of Contents
Advertisement
TRENDnet User's Guide
DDNS
If your camera is set to use PPPoE as its default network connection, you can
use the Dynamic DNS (DDNS) for network access.
Before you start:
Registration on the DDNS server is required before configuring the DDNS
settings of the camera.
Steps:
1. Check the Enable DDNS checkbox to enable this feature.
2. Select DDNS Type. Two DDNS types are selectable: DynDNS and NO‐IP.
DynDNS or NO‐IP:
Steps:
(1) Enter Server Address of DynDNS or NO‐IP (e.g.
members.dyndns.org).
(2) In the Domain text field, enter the domain name obtained from the
DynDNS website.
(3) Enter the User Name and Password registered on the DynDNS
website.
(4) Click Save to save the settings.
© Copyright 2019 TRENDnet. All Rights Reserved.
TV‐IP345PI
26
Advertisement
Table of Contents
