Table of Contents
Advertisement
TRENDnet User's Guide
Email
© Copyright 2019 TRENDnet. All Rights Reserved.
1.
Configure the following settings:
Sender: The name of the email sender.
Sender's Address: The email address of the sender.
SMTP Server: IP address or host name (e.g., smtp.263xmail.com) of the
SMTP Server.
SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25 (not
secured). And the SSL SMTP port is 465.
Email Encryption: None, SSL, and TLS are selectable. When you select
SSL or TLS and disable STARTTLS, e‐mails will be sent after encrypted by
SSL or TLS. The SMTP port should be set as 465 for this encryption
method. When you select SSL or TLS and enable STARTTLS, emails will
be sent after encrypted by STARTTLS, and the SMTP port should be set
as 25.
Note: If you want to use STARTTLS, make sure that the protocol is
supported by your e‐mail server. If you check the Enable STARTTLS
checkbox when the protocol is not supported by your e‐mail sever, your
e‐mail will not be encrypted.
Attached Image: Check the checkbox of Attached Image if you want to
send emails with attached alarm images.
Interval: The interval refers to the time between two actions of sending
attached pictures.
TV‐IP345PI
32
Advertisement
Table of Contents
