TRENDnet User's Guide
Authentication (optional): If your email server requires authentication,
check this checkbox to use authentication to log in to this server and
input the login user name and password.
For your privacy and to better protect your system against security
risks, we strongly recommend the use of strong passwords for all
functions and network devices. The password should be something
of your own choosing (using a minimum of 8 characters, including
at least three of the following categories: upper case letters, lower
case letters, numbers and special characters) in order to increase
the security of your product.
Proper configuration of all passwords and other security settings is
the responsibility of the installer and/or end‐user.
The Receiver table: Select the receiver to which the email is sent. Up to
3 receivers can be configured.
Receiver: The name of the user to be notified.
Receiver's Address: The email address of user to be notified.
© Copyright 2019 TRENDnet. All Rights Reserved.
HTTPS
HTTPS provides authentication of the web site and its associated web server,
which protects against Man‐in‐the‐middle attacks. Perform the following
steps to set the port number of https.
1.
2.
Check the checkbox of Enable to enable the function.
Create the self‐signed certificate or authorized certificate.
Create the self‐signed certificate
(1) Select Create Self‐signed Certificate as the Installation Method.
(2) Click Create button to enter the creation interface.
(3) Enter the country, host name/IP, validity and other information.
(4) Click OK to save the settings.
Note: If you already had a certificate installed, the Create Self‐signed
Certificate is grayed out.
TV‐IP345PI
33