Tt Paper Empty Sensor Pcb Assy (Common To All Tt) - Brother HL-L5000D Service Manual

12.20 TT paper empty sensor PCB ASSY (Common to all TT)

(1) Release the hook on the bushing, and pull out the TT separation roller shaft to remove
the TT paper empty actuator.
(2) Release the hook to remove the TT paper empty actuator cover.
(3) Release the TT paper empty sensor harness from the securing fixtures.
(4) Remove the taptite bind B M3x10 screw to remove the TT paper empty sensor PCB
ASSY.
TT paper empty actuator cover
Hook
Harness routing: Refer to
TT paper empty actuator
Fig. 3-183
"15. TT relay PCB ASSY (Each TT
TT separate roller shaft
Hook
Bushing
unit)".
3-185
Taptite bind B M3x10
TT paper empty sensor
PCB ASSY
TT paper empty sensor
harness
Confidential