Fan Motor - Brother HL-L5000D Service Manual

12.7 Fan motor

(1) Release the fan motor harness from the securing fixtures, and disconnect it from the fan
motor relay harness.
(2) Release all hooks to remove the fan motor from the air duct.
Air duct
Harness routing: Refer to
Assembling Note:
• Place the fan motor so that the attached label faces outwards.
• Do not pull the fan motor relay harness too much, it may cause a connection failure
with the TT control PCB ASSY.
• When wiring, make sure that the fan motor harness does not come out of the air
duct.
Hook
Fig. 3-157
"14. Upper right of the
3-161
Hooks
Hole
Fan motor relay harness
Fan motor harness
Fan motor
TT".
Label
Confidential