Brother HL-L5000D Service Manual page 33

Part name
MP separation roller,
MP separation pad
MP paper empty actuator
(MP paper empty sensor)
Eject stack actuator
(Eject stack sensor)
MX switching flapper
MX jam lower actuator
(MX jam lower sensor)
MX jam upper actuator
(MX jam upper sensor)
MX flapper
MX eject roller 1/2/3/4
MX feed roller 1
MX feed roller 2
MX bin stack actuator
(MX bin stack sensor)
MX back cover sensor
MX 2bin sensor,
MX 4bin sensor
Separates the paper fed from the MP tray into single sheets.
Detects the paper in the MP tray.
Detects paper jams in the MP tray.
Detects the full of a machine output tray. (Touch panel models
only)
Selects where the paper is ejected (output tray / MX).
Detects paper jams in the MX 1bin and 2bin.
Detects paper jams in the upper section of the output tray.
Detects paper jams in the MX 3bin and 4bin.
Detects paper jams in the rear side of the MX.
Selects where the paper is ejected (MX 1bin / 2bin / 3bin / 4bin).
Ejects the paper to each bin.
Feeds the paper ejected from the machine to the MX feed roller
2, MX eject roller 1, or MX eject roller 2.
Feeds the paper ejected from the MX feed roller 1 to the MX
eject roller 3 or MX eject roller 4.
Detects the full state of the MX 1bin / 2bin / 3bin / 4bin.
Detects open / closed MX back cover.
Detects the MX 2bin and 4bin.
2-7
Operation
Confidential