Relay Front Pcb Assy - Brother HL-L5000D Service Manual

9.19 Relay front PCB ASSY

(1) Release the relay front harness from the securing fixtures.
(2) Release the two hooks, and remove the front cover sensor. Release the front cover
sensor harness from the securing fixtures.
Note:
• When removing the front cover sensor, push it from the rear to remove it.
(3) Release the two hooks, and remove the relay front PCB ASSY. Disconnect all harnesses
from the relay front PCB ASSY.
Relay front harness
Relay front PCB ASSY
Front cover sensor harness
Harness routing: Refer to
T1 pickup clutch harness
Front cover sensor
Fig. 3-67
"3. Left side of the machine (Common to all
3-78
Hooks
Registration clutch harness
MP solenoid harness
Toner amount detection sensor
PCB harness (light reception)
Develop clutch harness
Relay front
PCB ASSY
models)".
Hooks
Confidential