T1 Paper Edge Sensor Pcb Assy/T1 Paper Edge Actuator/T1 Paper Edge Actuator Spring - Brother HL-4140CN Service Manual

9.48 T1 Paper Edge Sensor PCB ASSY/
T1 Paper Edge Actuator/
T1 Paper Edge Actuator Spring
(1) Remove the three Taptite bind B M3x10 screws of the Pinch roller shaft sub ASSY from
the MP drive frame.
(2) Remove "A" of the Registration roller ground wire.
(3) Remove the MP drive frame from the PF ASSY.
Taptite bind B M3x10
Taptite bind B M3x10
(4) Release the Hook to remove the Separation R shaft bush from the T1 drive shaft gear
Z17M07.
MP drive frame
PF ASSY
"A"
Registration roller ground wire
Fig. 3-160
T1 drive shaft gear Z17M07
Hook
Separation R shaft bush
Fig. 3-161
3-118
PF ASSY
Pin
Confidential