Lt Paper Empty Sensor Pcb Assy - Brother HL-L5000D Service Manual

10.11 LT paper empty sensor PCB ASSY

(1) Release the hook on the bushing, and pull out the LT separation roller shaft to remove
the LT paper empty actuator.
(2) Release the hook, and remove the LT paper empty actuator cover.
(3) Release the LT paper empty sensor harness from the securing fixtures.
(4) Remove the taptite bind B M3x10 screw, and remove the LT paper empty sensor PCB
ASSY.
LT paper empty actuator
LT paper empty actuator cover
Hook
Hook
Bushing
Fig. 3-117
3-125
LT separate roller shaft
Taptite bind B M3x10
LT paper empty sensor
PCB ASSY
LT paper empty sensor
harness
Confidential