Turning The Footrests; Control - Invacare Aquatec Ocean E-VIP User Manual

Shower and toilet commode
Hide thumbs Also See for Aquatec Ocean E-VIP:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Operation

5.3 Turning the footrests

Mounting position/dismounting position:
1. Draw footrest A in guide B upwards slightly, until the groove is no
longer engaged in the pin of clip C.
2. Turn the footrest to the side.
Driving position:
CAUTION
Risk of accident due to loose footrest
▸ Secure the footrests in the driving position.
1. Turn footrest A inwards.
2. Press down the footrest until the groove engages in the pin of
clip C.

5.4 Control

The product is controlled via the hand control.
The device will stop immediately in its current position as soon as the
relevant buttons are released.
For safety reasons, the drives have certain blocked ranges:
Seat height
Seat tilt
500 to 600 mm
up to 5° forwards
up to 35° backwards
Shower and Toilet Commode Ocean E-VIP
Seat height
Seat tilt
over 600 mm
no forward movement
up to 35° backwards
IMPORTANT
If the battery in the battery pack is not sufficiently charged,
yellow indicator lamp D on hand control A lights up and an
acoustic signal is heard while moving. After the indicator lamp
lights up, just five more movement cycles can be carried out.
After this, the lifting function of the device is disabled. You
can, however, still lower the device.
▸ Recharge the battery immediately after lowering the device.
CAUTION Danger of pinching fingers
▸ Do not place your fingers between the seat fame and the
front tubular frame of the chassis when tilting or lowering
the seat.
IMPORTANT
If the seat frame is tilted forward, the seat height can be
adjusted to a maximum of 600 mm.
If the seat height is set to more than 600 mm, the seat fame
can no longer be tilted forward.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents