Removing The Battery Pack - Invacare Aquatec Ocean E-VIP User Manual

Shower and Toilet Commode Ocean E-VIP
4. Fold safety bar B forward.
5. Remove the long connector cable C (180 mm) between the battery
pack and electronics box.
6. Attach short connector cable D (110 mm).
7. Fold the safety bar back again.
8. Reattach the terminal strip.
9. Swap blue plug E of the charging socket with the plug with the
hole F.
10. Insert connector G on the electronics cover into charger socket H
of the battery pack.
IMPORTANT
▸ Make sure that the connector is positioned correctly.
11. Attach the front section A to the electronic cover and secure it on
the tube with safety clips B.
12
12. Attach the rear part of the electronics cover C from above.
Removal:
The electronics cover is removed in the reverse order to installation.

4.10 Removing the battery pack

1. Remove the electronics cover, see 4.9 Fitting the electronics cover,
Removal.
IMPORTANT
▸ Make sure that the connector between
the electronics cover and the battery pack is disconnected.
2. Draw the footrests upwards out of the guides and place them to
one side.
3. Fold safety bar B forward and remove connector C from battery
pack A.
Assembly and installation