Charging The Battery - Invacare Aquatec Ocean E-VIP User Manual

Shower and toilet commode
Hide thumbs Also See for Aquatec Ocean E-VIP:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Assembly and installation
4. Insert the connector cable in cable holder A.
5. Use one hand to push back unlocking tab B on the top of battery
pack C .
6. With your other hand, lift the battery pack approx. 5 mm and
draw it out approx. 10 mm.
7. Remove the battery pack from control box A with twist and tilt
movement.

4.11 Charging the battery

The product cannot be used while the battery is charging.
A
Shower and Toilet Commode Ocean E-VIP
The battery can be charged with the electronics cover attached or
detached and when the battery pack is removed.
WARNING
▸ Never throw the battery pack into the fire or store it near
naked flames.
▸ Never open the battery pack. Opening the battery pack will
void the warranty.
▸ Only connect the charger to the mains when the battery
pack is connected to the charger.
CAUTION Risk of electric shock!
▸ Only recharge the battery in dry rooms and never in the
bathroom.
▸ With the electronics cover removed after charging, close off
the socket on the battery pack with the dust cap.
IMPORTANT
▸ Only use the charger supplied (Aquatec®Ocean E-VIP) to
charge the battery in the battery pack.
▸ Make sure that the voltage specifications shown on the
charger correspond to those of the mains supply.
▸ Follow the instructions in Section 7.3 on how to maintain
the service life of the battery when not in use for a lengthy
period.
G
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents