Table of Contents
Advertisement
Locations and Functions of Parts and Controls
Front panel
1
2
3
4
1 Display window
2 POWER ON/OFF switch
Turns the unit alignment controller on or off.
3 CURSOR ◊/√/∫/ı buttons
Move the cursor of the menu in the display window or
change the data.
4 HOLD button
Confirms the selected unit, cell or pixel to be adjusted.
5 MODE select buttons
SPG (Signal Pattern Generator) button: Displays a
test signal on a JumboTron display unit. You can
select and display the desired signal among eleven
signals; WHITE, BLUE, RED, GREEN, STAIR
STEP, COLOR BAR-V (vertical color bar), COLOR
BAR-H (horizontal color bar), CHARACTERS,
BEAM BLANKING, TEST and RASTER.
ADJUST button: Adjusts the luminance of a
JumboTron display unit.
UNIT CONTROL button: Checks the functions of a
JumboTron display unit.
10
CURSOR
C
D
E
F
8
9
A
B
HOLD
4
5
6
7
0
1
2
3
DEMO (demonstration) button: Used for the
demonstration function.
6 OPERATION buttons
SETUP button: Changes the on-screen menu in the
display window.
WRITE button: Stores the adjusted data into
memory when adjusting the luminance manually.
ENTER button: Confirms the data value input with
the numeric buttons, or executes a specified operation.
7 Numeric buttons
Inputs the data in hexadecimal.
MODE
SPG
ADJUST
5
UNIT
DEMO
CONTROL
OPERATION
SETUP
6
WRITE
ENTER
7
Advertisement
Table of Contents
