Removing The 2280 Solid-State Drive/Intel Optane Memory Module In M.2 Slot One; Installing The 2280 Solid-State Drive/Intel Optane Memory Module In M.2 Slot One - Dell G3 3500 Service Manual

Removing the 2280 solid-state drive/Intel Optane memory
module in M.2 slot one
Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
NOTE: This procedure applies only to computers shipped with a 2280 solid-state drive installed in M.2 slot one.
NOTE: Depending on the configuration ordered, your computer may support either 2230 solid-state drive or 2280 solid-
state drive in M.2 slot one.
The following image indicates the location of the 2280 solid-state drive/Intel Optane memory module installed in M.2 slot one and provides
a visual representation of the removal procedure.
Steps
1. Remove the two screws (M2x3) that secure the solid-state drive bracket to the system board and the palm-rest and keyboard
assembly.
2. Lift the solid-state drive bracket off the palm-rest and keyboard assembly.
3. Slide and lift the solid-state drive/Intel Optane memory module off the SSD1 slot on the system board.
Installing the 2280 solid-state drive/Intel Optane memory
module in M.2 slot one
Prerequisites
If your are replacing a component, remove the existing component before performing the installation procedure.
20 Removing and installing components
Before working inside your computer.