Removing The Solid-State Drive/Intel Optane Memory Module; Prerequisites; Procedure - Dell Inspiron 3583 Service Manual

Identifier
Status
Removing the solid-state drive/Intel Optane
You need to disable the Intel Optane memory before removing Intel Optane memory module from your computer. For more information
about disabling the Intel Optane memory, see
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

Remove the base cover.
Identifier
Status

Procedure

1 Loosen the two captive screws that secure the solid-state drive shield/Intel Optane shield and solid-state drive/Intel Optane to the
palm rest and keyboard assembly.
NOTE: solid-state drive shield/Intel Optane shield is available only on computers shipped with NVMe solid-state drive/
Intel Optane. In computers shipped with SATA solid-state drive/Intel Optane, remove the screw (M2x2.2) that secures
the solid-state drive/Intel Optane to the palm rest and keyboard assembly.
2 Lift the solid-state drive shield/Intel Optane shield off the palm rest and keyboard assembly.
3 Slide and remove the solid-state drive/Intel Optane from the solid-state drive/Intel Optane slot.
GUID-EFFE3DA7-AFC7-4BB0-92C9-4A1B23C2F2F5
Released
Disabling Intel Optane
computer. After working inside your computer, follow the instructions in
GUID-34811F23-7A7F-4B2B-8C5C-F676882335D1
Released
GUID-60EDC575-E10E-4CB3-BEA4-0B07072983EB
Released
memory module
memory.

Removing the solid-state drive/Intel Optane memory module

18
After working inside
www.dell.com/
39