Using The Answering System; Setting Up Your Answering System - Uniden AS1051 Series User Manual

Using the Answering System

Setting Up Your Answering System

Recording your outgoing message
Your personal outgoing message or greeting can be between 2
seconds and 30 seconds long. If you don't want to record an outgoing
message, the system will use its pre-recorded greeting:
Hello, no one is available to take your call. Please leave a
message after the tone.
To record your greeting:
From the base
1. Open the menu and select Ans.
Setup.
2. Select Record Greeting.
3. Press
MENU/SELECT
for the system to say "Record
greeting," then begin speaking.
4. When you're finished, press
The system plays back your
STOP.
new greeting.
5. To keep this greeting, press
. To re-record it, go back to
STOP
step 2.
Switch between the pre-recorded greeting and your own
greeting
From the base
1. Open the menu and select Ans.
Setup.
2. Select Greeting Options. The
system plays back the greeting it is
currently using.
3. Press
PHONEBOOK/LEFT
to switch greetings.
RIGHT
From a cordless handset
1. Press
answering system. Wait until the
system finishes its announcements,
or press
again. Wait
2. Press
3. Wait for the system to say "Record
greeting," then begin speaking.
PLAY/
4. When you're finished, press
stop recording. The system plays
back your new greeting.
PLAY/
5. To keep this greeting, press
To re-record it, go back to step 2.
From a cordless handset
1. Press
answering system. Wait until the
system finishes its announcements,
or press
2. Press
greeting it is currently using.
or
CALLER ID/
3. Press
to access the
MESSAGES/MUTE
to skip them.
5 (STOP)
.
8
to access the
MESSAGES/MUTE
to skip them.
5 (STOP)
. The system plays back the
6
again to switch greetings.
6
to
8
.
END
19