CONTENTS Introduction ...1 Features ...1 Included in your package ...1 Location and Controls ...2 Setup ...2 Connecting Line Cords and AC Adaptors ...3 Setting Time and Date ...3 Optional Backup Battery Installation ...3 Telephone Key Function ...5 Display Messages ...6 Caller ID ...7 Caller ID Operation ...7 Speed Dial Numbers ...8...
LOCATION OF CONTROLS This unit is not waterproof. Do not expose this product to Handset rain, water, moisture or any other liquid. SETUP Optional AA Batteries can be used instead of the AC Adaptor. Hook Switch Speaker Coil Cord In Use Indicator AC Adaptor Line Cord Battery...
Connecting Line Cords and AC Adaptor 1. Plug one end of the supplied telephone cord into the telephone line socket located at the rear of the phone. 2. Plug the other end into the telephone line wall jack. 3. Plug the AC Adaptor lead into the power socket at the rear of the phone. 4.
Digit Insert 0 Caller ID To correctly display and dial Call ID numbers, you may need to insert a digit at the beginning of your telephone number. (eg: in New Zealand, Telecom requires a '0' to be inserted.) New Zealand: If you subscribe to Telecom New Zealand, this code has already been set for you to '0'.
TELEPHONE KEY FUNCTIONS Ringer Hi/Low Set the Ringer Switch to the desired level underneath the unit. Regular dialling Lift the handset and listen for dial tone. Then enter the telephone number you wish to call. The dialled number will appear on the display screen whenever you make a call. Redial function To redial the previous number you called.
DISPLAY MESSAGES Message Waiting If you have arranged a voice mail service with your telephone company, the LCD screen will display MESSAGE WAITING For LCD messages to received. The screen will then display operate, you must first left corner until you retrieve the message from the voice subscribe to the caller ID mail service.
CALLER ID A caller ID record consists of the following information: The LCD display will not operate if the AC Adaptor is not connected or if the batteries are flat or not installed. CALLER ID OPERATION New Call Indicator The red indicator light of your phone will flash when you have New Calls. It will continue to flash until you have reviewed the calls displayed on the LCD screen.
SPEED DIAL NUMBERS Six speed dial numbers can be programmed into the memory of your telephone A Speed Dial label has Storing One-Touch Speed Dial Numbers been provided to 1. Press record Speed Dial 2. Enter phone number using the keypad (up to 16 digits). names.
Verify that you are using the correct line cord and that it is plugged in correctly. Caller ID Please check with your service provider that your subscription to this service is active. Please refer to our website for further information and frequently asked questions. www.uniden.co.nz New Zealand - www.uniden.com.au Australia -...
Warranty only available in original country of purchase. ELEMENT OF WARRANTY: Uniden warrants to the original retail owner for the duration of this warranty, its FP203 corded phone (herein after referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.