To...
cancel a
transfer
accept a
transferred
call
If you subscribe to a voice mail service, your phone can notify
Voice Message Notification
you when you have a new message waiting. This feature supports
Frequency-Shift Keying (FSK) message notification. Contact your
voice mail provider for information.
When you have new messages, the voice message icon appears in
the display, and the
After you listen to your messages, the voice message icon turns off.
If it doesn't, you can reset it: With the phone in standby, open the
menu and select Global Setup; select VMWI Reset, then select Yes.
USING THE ANSwERING SYSTEM
You can change the answering system options from any handset. Just
Answering System Options (Ans.Setup)
open the menu and select Ans. Setup.
Security Code
Ring Time
Record Time
Follow these steps:
Press
Talk/flasH
1. To answer the page and speak to the transferring
handset using the intercom, press
2. To speak to the outside caller, press
sTaTus
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 18).
Set the number of rings (6, 9, or 12) before the
answering system answers the phone. Choose Toll Saver
to have the system pick up after 2 rings if you have new
messages or after 4 rings if you don't.
Set the amount of time (1 or 4 minutes) callers have to
leave a message. Choose Announce Only if you don't
want the system to let callers to leave a message.
to return to the call.
light on the handset blinks.
HOld/ClEaR/inTERCOm.
Talk/flasH
.
15