Using The Answering System; Answering System Options (Ans. Setup) - Uniden DECT 2145 Series Owner's Manual

usIng the answerIng system

answering system options (ans. setup)

You can set or change the answering system options from any handset.
Just open the menu and select Answering Setup. Select one of the
following:
Menu Option
Security Code
Ring Time
Record Time
Message Alert
Call Screen
Ans. On/off
Record Greeting
Greeting Options
22
What it does
Enter a 2-digit PIN so you can access your
answering system from any touch-tone phone (see
page 25).
Set the number of rings (6, 9, or 12) before the
system answers. Toll Saver makes the system
answer after 2 rings if you have new messages or
after 4 rings if you don't.
Set the amount of time (1 or 4 minutes) callers have
to leave a message. Choose Announce Only if
you don't want the system to let callers to leave a
message.
Have the system beep every 15 seconds when you
have a new message. The alert stops after you
listen to all your new messages or if you press any
key on the base.
Turn on the call screen feature so you can hear
callers as they leave messages on the base
speaker (see page 25).
Turn your answering system on or off. You can also
press ANS ON/OFF on the base.
Record an outgoing message or greeting (see page
23).
Switch greetings or delete your greeting (see page
23).