Handling Liquid Damage; Important Information; Terms Used In This Guide - Uniden AS1051 Series User Manual

Table of Contents

Advertisement

Handling Liquid Damage

Moisture and liquid can damage your cordless phone.
If the handset or base is exposed to moisture or liquid, but only the
exterior plastic housing is affected, wipe off the liquid and use as
normal.
If moisture or liquid has entered the plastic housing (i.e. liquid can
be heard in the phone or liquid has entered the handset battery
compartment or vent openings on the base), follow these steps:
Handset
1. Remove the battery cover and disconnect the
battery.
2. Let dry for at least 3 days with the battery
disconnected and the cover off for ventilation.
3. After the handset dries, reconnect the battery
pack and replace the cover. Recharge the
battery fully (15-20 hours) before using.
IMPORTANT: You must unplug the telephone line while
recharging the battery pack to avoid charge interruption.
CAUTION! DO NOT use a microwave oven to speed up
the drying process. This will cause permanent damage
to the handset, base and the microwave oven.

Important Information

Terms Used In This Guide

Accessory
An extra handset that can register to and be used with an expandable phone base. All
Handset
accessory handsets must be registered to a base.
The main part of the phone. It connects to your phone line and lets you make and receive
Base
calls. Most bases also have a cradle to store a handset.
CIDCW
(CID on Call Waiting.) A service that shows CID for calls that come in during another call.
Call Waiting A service that lets you receive calls while you are on another call.
Caller ID
(Also called CID.) A service that shows the name and number of incoming callers.
Charger
A cradle that stores and charges a handset but doesn't connect to the phone line.
The part of the phone that stores a handset. While in a cradle, a handset is always in
Cradle
standby, and any keys are locked.
28
Base
1. Disconnect the AC
adapter to cut off the
power.
2. Disconnect the
telephone cord.
3. Let dry for at least 3 days
before reconnecting.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

As1051As1051-2As1051-3As1051-4As1051-5As1051-6

Table of Contents