Voice Message Notification; Using Your Phone During A Power Failure; Using The Answering System; Answering System Options (Answering Setup) - Uniden D1788 User Manual

3. Press
Menu/select
the phonebook.

Voice Message Notification

• If you subscribe to a voice mail service, your phone can notify you when
you have a new message. This feature supports Frequency-Shift Keying
(FSK) notification. Contact your voice mail provider for information.
• When you have new messages, the display shows a message icon. After
you listen to your messages, the message icon turns off. If it doesn't, you
can reset it. With the phone in standby, open the menu and select Global
Setup; select VMWI Reset, then select Yes.

Using Your Phone During a Power Failure

If there is a power failure, you can still make and receive phone calls using
the base corded handset, including Call Waiting calls and changing the
earpiece volume. All other features of the base and all cordless handsets
will not function.
#
While the power is out, the base uses a special ringer; you cannot
adjust the volume of this ringer.

USING THE ANSWERING SYSTEM

Answering System Options
You can set or change the answering system options from any station. Just
open the menu and select Answering
Submenu
Security Code
Ring Time
Record Time
English - 18
to send the code. If you change your mind, just close
Purpose
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (seepage 21).
Set the number of rings (2, 4, or 6) before the system
answers. If you call in remotely to check your messages,
Toll Saver makes the system answer after 2 rings if you
have new messages or after 4 rings if you don't.
Set the amount of time
leave a message. Choose
want the system to let callers leave a message.
(Answering
Setup. Select one of the submenus:
(1 or 4 minutes) callers have to
Announce Only
Setup)
if you don't