Mitsubishi a2 Series Programming Manual page 86

α
2 Simple Application Controllers
2 ) Counter Operation of input pin U, input pin D, input C, input pin P , current value and output
Input pin U
Input pin D
Input pin C
Input pin P
Current value of
up-down counter
Set value (-4)
Output
Setup of the Up/Down Counter Function Block directly from the
1 ) Allocate the input pin to be used for the function block.
2 ) Press the "OK" key with the cursor in the function block. The function block edit screen is
displayed as shown.
3 ) Press the "OK" Key and enter the Up/Down counter function block settings using the "+, -,
and " keys. The Direct Set of the count s ettings can be entered.
4 ) Press the "OK" Key and an Analog In function block value can be entered.
5 ) Press the "OK" key and using the "ESC" key return to the function block edit screen.
2 2
1 1
0 0
-4
ON OFF
-2
-3
-4
-5
-6
-7
α
Function Blocks 6
0
-4
-5
-8
2 Series Controller
B 0 0 1 : UD
S e t u p F B
C h a n g e N o
D e l e t e F B
B 0 0 1 : UD
D i r e c t S e t
N =
n =
B 0 0 1 : UD
D i r e c t S e t
A n a l o g
F B V a l u e
6 - 28
0
0
I n