Mitsubishi a2 Series Programming Manual page 88

α
2 Simple Application Controllers
5 ) Press the "OK" Key and a Direct Set value can be entered..
6 ) Or press the "ESC" key to return to the function block data input type menu, select the
Analog In selection and press the "OK" key
7 ) Or press the "ESC" key to return to the function block data input type menu, select the FB
Value selection and press the "OK" key.
8 ) Using either the "OK" key or the "ESC" key depending on the acceptance of the setting.
Press the "OK" key when the Condition is highlighted. Thus, selecting the correct
comparator from the range.
9 ) Having set the V1, condition and V2 simultaneously use the "ESC" key to return to the
function block edit screen.
Function Blocks 6
B 0 0 1 : CP
Cmp V a l 1
D i r e c t S e t
0
B 0 0 1 : CP
Cmp V a l 1
A n a l o g I n
A 0 1 0
B 0 0 1 : CP
Cmp V a l 1
N o t E x i s t
V a l i d F B
B 0 0 1 : CP
C o n d i t i o n
V 1 = V 2
6 - 30