HP ENVY x360 13 Maintenance And Service Manual page 51

(7) TouchPad ZIF connector cable
(8) Keyboard ZIF connector cable
(9) Keyboard backlight ZIF connector cable
2. Fold back the shielding material (1) to access the system board screws.
3. Remove the four Phillips M2.0×3.0 broad head screws (2) that secure the system board to the keyboard/
top cover.
4. Remove the Phillips M2.5×6.6 screw (3) that secures the display right hinge to the keyboard/top cover.
5. Lift the display right hinge (4) and swing it back as far as it will travel.
Component replacement procedures 43