Rear Speakers - HP ENVY x360 13 Maintenance And Service Manual

Rear speakers

Description
Rear speakers (includes left and right speakers, cables, and rubber isolators)
Before removing the rear speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the rear speakers:
1. Disconnect the rear speaker cable (1) from the system board.
2. Release the rear speaker cable from the retention clips (2) built into the keyboard/top cover.
3. Remove the rear speakers (3).
NOTE:
isolators (4). These isolators are critical to the performance of the rear speakers. The absence of these
isolators or damage to them can degrade the rear speaker performance.
Reverse this procedure to install the rear speakers.
Bottom cover on page
Battery on page
When removing the rear speakers, make note of the location and condition of the four rubber
28).
29).
Spare part number
L19602-001
Component replacement procedures 41