Audit Trail - ABB IndustrialIT Compact HMI 800 Getting Started

Audit Trail

Note, that you need to enable the function in the Message source tab in the
Message Handler aspect.
13. When the configuration has been completed please restart the messenger
service by disabling and enabling the service using the aspect:
[Service Structure]Services/Messenger Server/Basic:Service Group Definition
14. You are now ready to test the messenger function. By generating an alarm, that
shows up in the created alarm list aspect, a message should be sent by SMS.
Audit Trail
The Audit Trail function is by default enabled in the Compact HMI 800 when
delivered. To view the Audit Trail please open the Audit Trail List aspect on the
plant object in the Functional Structure.
To disable the Audit Trail function follow the steps below:
1. Log on as SysAdmin.
2. Open the Admin Structure in the Plant Explorer expand Administrative Objects
and browse to aspect:
Domains\HMI Server:Audit Trail Config
3. Double-click on the Audit Trail Config aspect to open the configuration view.
4. Unmark the Audit Trail active check box, and click Apply.
5. The Audit Trail function has now been disabled.
To enable the Audit Trail function follow the steps below:
1. Follow step 1-3 above.
2. Mark the Audit Trail Active check box and the Audit Event Filtering area
will become active.
If you select the Log Generic Audit Events check box, all the audit events
which are predefined in the system without details will be logged.
84
Section 4 Engineering
3BSE040587R4401