Connecting The Instances To Real Signals - ABB IndustrialIT Compact HMI 800 Getting Started

Section 4 Engineering
1. Choose from what type you want to create instances.
2. Give name of the new object.
3. Choose which controller the object will be placed in.
4. In 4a choose how many objects you want. If you choose more than one object
in 4a, 4b will be opened and you can choose up to 999 objects. The objects will
get numbers in row after the name.

Connecting the Instances to Real Signals

Now each signal has to be connected with the corresponding property in the PLC.
Do this by opening the signal configuration aspect.
To connect the signals, check the connected radio button in the variable
connection field. Click Browse to connect to the property in the PLC.
See the
Figure 28. Connect the Signals
After selecting the property click Apply in the OPC browser window. See
below. Do not close the window. Repeat for each signal.
3BSE040587R4401
Figure 28 below.
Connected radio button
Connecting the Instances to Real Signals
Browse button
Figure 29
61