Connectivity To Ac 800M - ABB IndustrialIT Compact HMI 800 Getting Started

Section 3 Installation
If you need to do some system administration work, e.g. change the IP address, you
log in as SysAdmin. As operator you log in as Operator. The following log in
alternatives exist:
Server node:
Operator
AppEng
SysAdmin
Client node:
Operator
Both nodes (Service account)
SwServiceAccount
It is recommended to change the default passwords above.
The SwServiceAccount is not available on the welcome screen.

Connectivity to AC 800M

The Compact HMI 800 uses PLC Connect to connect to all PLCs and Controllers.
PLC Connect can be used to connect AC 800M/C controllers versions 3.0-3.2 using
the corresponding Control IT OPC Server 3.0-3.2. PLC Connect can also be used to
directly connect AC 800M 2.0/2.1/2.2/3.0/3.1/3.2 and AC800C 2.2/3.2 versions,
using any of the following protocols with PLC Connect acting as master and AC
800M/C as slave:
• Serial connection and the Comli protocol. (Limited Comli).
• SattBus on TCP/IP (Ethernet).
3BSE040587R4401
Table 4. Predefined Users
User
Connectivity to AC 800M
Password
Operator
AppEng
SysAdmin
Operator
hmi800
33