Section 7 Administration; Adding New Users - ABB IndustrialIT Compact HMI 800 Getting Started

Section 7 Administration

This section describes how to Add Users, make a Backup and Restore and other
system administration and maintenance tasks. Also refer to Industrial
System, Administration and Security.

Adding New Users

The Compact HMI 800 product is set up to run Work groups in Windows. Three
user roles (User Groups) are defined at delivery: Operator, AppEng and SysAdmin.
All these have default passwords, see
To add a new user to the Compact HMI 800 after it has been created in Windows,
follow the steps below:
All Users and groups has to be created in all the Compact HMI 800 nodes with
the same spelling and passwords
1. Log in as System Administrator.
2. Start the Configuration Wizard.
3. Go to System Administration/<System>/Users.
4. Click Add Windows Account button.
5. Add a user.
6. Click Next and Finish.
To add a user to a new group do as follows:
1. Log in as System Administrator.
2. Start the Configuration Wizard. Start > All Programs > ABB Industrial IT
Base > System > Configuration Wizard.
3. Go to System Administration/<System>/Users.
4. Select User and move a group from the list box "Not member" to "Member".
3BSE040587R4401
Section 7 Administration
Table 4, Predefined Users on page
Adding New Users
IT
Base
33.
115