ABB IndustrialIT Compact HMI 800 Getting Started page 164

Creating a Tank Element
Figure 111. Creating Tank Body
Creation of Tank Top and Tank Bottom.
1. Click on the Ellipse icon (AdvantEllipse). See
2. Draw a rectangle in the drawing area.
3. Use the handles to resize the figure to the same width as the tank body.
4. Change the following properties.
FillStyle = 3D Vertical.
LineWith = 0.
5. Use Send To Back to make it look nice.
164
Section 8 PLC Connect Graphic Elements
Reshape the figure Resize the figure
Figure 112.
3BSE040587R4401