Backup And Restore - ABB IndustrialIT Compact HMI 800 Getting Started

Backup and Restore

5. Click Next.
6. Click Finish.
The Windows user must be a member of the Industrial IT User group to use the
Compact HMI 800.
Backup and Restore
The Compact HMI 800 server is equipped with two hard drives, one that is used for
the runtime data of the system (disk C), and the other for the Ghost images and
backups (disk D).
The Compact HMI 800 server is delivered with two recovery DVDs. One is labeled
"As Manufactured DVD" and contains a Ghost image of the computer, as it was
manufactured by the computer vendor. The other DVD is labeled "Server Restore
DVD".
The "Server Restore DVD" contains the following:
- A ghost image including the Compact HMI installation named "Server Restore
DVD".
- A folder with a Compact HMI system configuration dump named
Compact_HMI_Full_Backup_<version>.
- A folder with Compact HMI Native Language Support files named CHMI_NLS.
A copy of the contents of the DVD is also available on the Backup Disk (D:).
The "Server Restore DVD" Ghost image is used in case of a system crash. This is an
image of the C disk before the system is created. This image is to be used on
recovery because the restore functionality demands that no system exist on the
computer.
Backups are configured as full backups of the Compact HMI 800 system and are
scheduled to be executed once a week. The backup images are saved on the drive D.
In case that the system is corrupted in some way, the System Administrator must do
the following steps:
1. Load the "Server Restore DVD" Ghost image.
2. Start the Configuration Wizard and run the Restore task to load the last backup,
and the status of the system will be as the last known correct configuration.
116
Section 7 Administration
3BSE040587R4401