ABB IndustrialIT Compact HMI 800 Getting Started page 131

Section 7 Administration
22. If the backup shows up in the window go to step 22. If the backup does not
show up in the window, click Select Path and add, and then browse to the
folder shown below.
Figure 81. Backup Folder
23. Click OK and OK again.
24. Select the backup that was done in Step 2 (or that was copied from the main
system, if you are setting up an autonomous redundant backup system), and
click Next. (If the change of Computer Name is done before the system has
been configured, use the restore dump available on the DVD supplied in the
Compact HMI 800 delivery (another path needs to be added)).
25. Now select Generate New System ID and enter the system name e.g. "HMI
Server55 System" and press Next.
3BSE040587R4401
Change the Windows Computer Name in the Server Node
131