Table of Contents
Advertisement
28
Playback of TAPE
Do not use a cassette tape with more than 90-minute recording time, for the tape used with such a cassette is very
thin and tends to cause troubles such as entanglement around the pinch roller or cutting of tape.
Selection of
reverse mode
To wind tape at high speed
In the direction of the arrow
2
2
23
TAPE
Direction of insertion
into main unit
To play (record) this side, play
(record) tape by setting the tape
transport direction to "3".
To play (record) the other side,
play (record) tape by setting the
tape transport direction to "2".
Selection of reverse mode
To reduce tape noise
(DOLBY NR)
Start playback
To stop play-
back
Ejecting
the cassette
tape
1. Insert a cassette tape.
÷ The cassette deck can play back Normal (TYPE ), High-position (TYPE ) and Metal
(TYPE
÷ Remove tape slack before loading.
Insert the cassette tape straight into
the insertion slot. Just push lightly
and the cassette will be pulled auto-
matically inside, and TAPE IN indica-
tor lights.
The cassette tape cannot be loaded or ejected while the unit is in standby
mode. Do not force load a cassette tape in standby mode, otherwise
malfunction will result.
2. Start playback.
During playback, the tape running direction changes each time the TAPE 23
key is pressed.
\
Transport direction indicators
Indicates the tape transport direction
during playback or recording by light-
ing of 2 or 3. This direction is the direc-
tion stored in memory when the tape
was last stopped.
1
1
) tapes.
(The "TAPE" input is selected automatically.)
Playback of TAPE
To wind tape at high speed
To stop playback
2
2
Start playback
T A P E
0 0 0 0
Tape counter
T A P E
0 0 0 7
Reverse mode
Transport di-
indicators
rection indica-
tors
Advertisement
Table of Contents
