Kenwood HM-982RW Instruction Manual page 87

CD recorder messages
Displayed Message
Rec Error
Mecha Error
Disc Error
Blank Disc
OPC
OPC Error
XXX 222
* OPC and PCA : When a disc which has not been finalized is loaded in the CD recorder, it perform test writing
in a specific area in the disc in order to calculate the optimum laser irradiation intensity and
time for the disc. This operation is referred to as the OPC (Optimum Power Control)
processing and the area in which test writing is performed is referred to as PCA (Power
Calibration Area).
Meaning
÷ A trouble occurred during recording.
Recording is not possible due to a
scratch, contamination or character-
istics of the disc.
÷ A mechanical trouble occurred.
Playback or recording is not possible
due to a scratch, contamination or
characteristics of the disc.
÷ Playback or recording is not possible
due to a scratch, contamination or
characteristics of the disc.
÷ The CD-R/RW with no recording is
loaded.
÷ The OPC* processing is being ex-
ecuted.
÷ A trouble occurred during OPC* pro-
cessing.
Recording is not possible due to a
scratch, contamination or character-
istics of the disc.
÷ A title containing 24 or more charac-
ters is input.
÷ Use a recordable disc.
Take out the disc and insert it again.
Clean the disc.
÷ Take out the disc and insert it again.
Clean the disc.
Change the disc.
÷ Take out the disc and insert it again.
Clean the disc.
Change the disc.
÷ If you want to play a disc, use a recorded CD-
R/RW.
÷ This is a normal operation.
‡
÷ Take out the disc and insert it again.
Clean the disc.
Use a recordable disc.
÷ The maximum number of title or text charac-
ters that can be displayed is 23.
Displayed message list In case of difficulty
Action
87