Table of Contents
Advertisement
while the other set of data displays as bars (and corresponds to the fields in line with
the data that is being displayed.
1. Use the measurement drop-down to switch between measurements if more than one measurement is selected
in the measurement list.
✐ Note: If only one measurement is selected in the list of measurements, select a different measurement to
change the displayed measurement.
2. Select Total to display the spectrum for the total measurement or Cursor to display the spectrum for the time at
which the cursor is placed.
3. Use the parameter drop-down to choose the spectrum parameter to display.
Hint: If you are displaying cursor data in the Spectrum window, the data will automatically update if you move the
cursor in the Measurement window.
Switch Views
Click
to switch between the graph and table views.
The Graph View
The graph displays decibel (dB) levels as a function of frequency (Hz).
Read Levels: Click on the graph to view a readout of the level at each frequency.
l
Zoom in or out: Mouse over the graph then scroll up or down to change the scale of the y-axis.
l
Fit to levels: Double-click in the region next to the y-axis to fit the scale to the levels of the graph.
l
The Table View
This view shows the data as a table of dB levels at each frequency.
Hint:
Right-click on the table and select Copy to copy its contents to your clipboard
l
If you are displaying cursor values in the table the cursor in the Measurement window to change the
l
Review Annotations
If you created annotations using the mobile application, you can review them in the PC app.
Check out the Gallery
You will find any photos or video that have been attached to the measurements in the project in the Gallery window.
1. Select measurements in the project browser.
2. Open a Gallery window.
88
Use the PC
App:
Examine the Project
). Change the fields to change
Advertisement
Table of Contents
