Create A Project; Import Measurements - B&K 2245 User Manual

For remote connections, the IP address or host name will depend on your setup. Refer to
l
nections
4. Click OK.

Create a Project

If you did not create a project using the mobile app, you can create a project in the PC app then import measurements
as needed.
You will need:
The PC app installed on your computer
l
Some measurements
l
Procedure:
1. Open the PC app.
2. Click
.
3. Give the file a name and click Save.
The defaults are:
Name: Untitled
l
Location: C:\Users\USER\Documents\Enviro Noise Partner
l
You are now ready to add measurements to your project.

Import Measurements

Import measurements to add them to a project. You can add measurements to empty projects or to projects that
already contain measurements.
✐ Note: If you import multiple measurements with markers, the markers from different measurements that have the
same name will be treated as the same marker type upon import.
You will need:
A project open in the PC app
l
One or more measurements
l
for information about which IP address or host name to use
81
Use the PC App: Create a Project
Remote Con-