Table of Contents
Advertisement
How to Change Display Settings
1. Open the menu.
From the instrument: Press
l
From the app: Tap to open the instrument menu.
l
2. Go to: Display settings.
3. Adjust the screen settings: brightness and colour scheme.
4. Select the brightness of the light ring.
5. Set up the displays for your measurements.
Go to SLM view to set up the instantaneous display (bar graph) and the readout for one broadband para-
l
meter
Go to List view to set up the instantaneous display (bar graph) and readouts for multiple broadband para-
l
meters (three on the instrument, five on the mobile app)
Go to Spectrum view to set up display of spectrum parameters
l
Go to Profile view to set up display of logged parameters
l
Go to About data view to enable display of information about the data
l
About Screen Settings
Screen brightness: Choose from six levels of brightness.
Colour scheme: Choose light or dark.
About Light Ring Brightness
Light ring brightness controls the brightness of the light ring on the instrument. Choose from four settings: Off, Low,
Normal or High.
About Measurement Display Settings
Graph parameter (SLM view and List view)
l
Choose the parameter for the bar graph; that is, the instantaneous (or fast) display of instantaneous sound levels.
Parameter (Spectrum view)
l
Choose the parameter for the spectrum display; that is, the display of sound levels by frequency.
Parameter (Profile view)
l
Choose the parameter for the profile display; that is, the display of logged sound levels by time.
briefly to open the menu.
52
Set up the
Instrument:
Display Settings
Advertisement
Table of Contents
