Table of Contents
Advertisement
a. You can find the IPv4 address of the instrument on the instrument or on the router.
On the instrument, go to: Menu > Network settings > Wi-Fi settings or Ethernet settings > IP
l
address
On the router, there should be a list of the connected devices
l
b. The instrument uses the following ports:
Port 80, the common port assigned to HTTP (hypertext transfer protocol)
l
Port 443, the common port assigned to HTTPS (hypertext transfer protocol secure)
l
Ports 8700 to 8720, open ports that the instrument uses
l
✐ Note: All ports use TCP (transmission control protocol).
3. From another network, such as a mobile network, test the setup.
✐ Note: Turn off Wi-Fi on your mobile device to make sure that you are not connected to the same network as
the instrument.
a. Open the mobile app.
b. From the instrument list, tap Add instrument manually.
✐ Note: If the mobile app is connected to an Instrument, disconnect from it to access the list.
c. Enter the IP address or host name.
For IPv4 addresses, this will be your network's public WAN IP address
l
You can find your WAN IP address on your router or through an Internet search of 'my IP'.
For DynDNS, this will be the host name given by the DynDNS
l
d. Tap Done.
e. Tap the instrument listing to connect.
✐ Note: You can also test the setup using the PC app. Click
select Add instrument from IP.
How to Connect Remotely via an IPv6 Address
You do not have to set up port forwarding when using an IPv6 address.
To test the remote connection, try to connect to the instrument from a different network. The easiest way to check is to
use a mobile device that has a mobile network and the mobile app installed.
✐ Note: Turn off Wi-Fi on your mobile device to make sure that you are not connected to the same network as the
instrument.
1. Open the mobile app.
2. From the instrument list, tap Add instrument manually.
✐ Note: If the mobile app is connected to an Instrument, disconnect from it to access the list.
to open the import dialog then click
25
Get
Started:
Remote Connections
and
Advertisement
Table of Contents
