About Back-erase Mode
This setting determines what happens when you resume a paused measurement.
Hint: You can change these settings while a measurement is paused.
Enable: Overwrite measurement data for the Back-erase time
l
Disable: Resume the measurement without overwriting earlier data
l
Measurement Parameters
How to Set up Broadband Parameters
The instrument measures basic broadband sound level parameters with frequency weightings that mimic how humans
hear sounds and time weightings that define the averaging of sound levels over time. The different parameters that you
can measure are combinations of the basic parameters (Leq, Lpeak, Lmax and Lmin) with frequency weightings (A, B, C
or Z) and time weightings (F, S or I).
You can make measurements with up to two frequency weightings simultaneously.
Set up the
Instrument:
41
Measurement Parameters