Table of Contents
Advertisement
d. Go to: Wi-Fi name.
e. Select the network you wish to join.
f. Enter the password at the prompt.
Use
and
Use
Press
Use the Instrument as a Hotspot
Connect your mobile device and / or PC to the instrument's hotspot so that the devices can communicate.
1. On the instrument, go to: System settings > Network settings > Wi-Fi settings > Wi-Fi mode.
2. Select Act as hotspot.
3. Make note of the hotspot name (example: BK2245-000000) and password.
4. Connect the mobile device and / or PC to the hotspot as per the manufacturer's instructions.
Change the Hotspot Password
If you wish to change the default password for the instrument hotspot:
1. Go to: System settings > Network settings > Wi-Fi settings.
2. Ensure that Wi-Fi mode is set to Act as hotspot.
3. Select Password.
4. Use
and
to scroll through the character menu.
5. Press
to confirm the changes.
✐ Note: Restart the instrument to apply the new password.
Remote Connections
It is possible to connect to an instrument remotely, that is, connect to an instrument on a network from a different net-
work or the Internet. Establishing a remote connection is a little more complicated than creating a local connection, but
it can be helpful if you want to be able to access your instrument from remote locations. The following includes inform-
ation about your instrument, general guidelines for the configuration of your router to enable remote connection, and
how to test the connection.
to scroll through the character menu.
and
to move left or right.
to advance to the options: OK or Cancel.
23
Get
Started:
Remote Connections
Advertisement
Table of Contents
