Use the App to Make a Measurement
The exact steps of a measurement will vary depending on the settings you use in Measurement control.
A basic overview is as follows:
1. Open an existing project or create a new one.
2. Tap Measure.
3. Tap
to start a measurement.
Hint: You can also start a measurement by placing a marker.
4. To pause, slide
5. Tap
to resume.
6. Slide
to the right to stop the measurement.
✐ Note: It will not be necessary to stop the measurement if you specified a measurement time in Meas-
urement control.
7. Tap
to reset the analyzers for the next measurement.
✐ Note: Measurement data is only stored on the instrument.
Place Markers
You can use all four markers multiple times in each logging measurement.
to the left.
Measurements:
65
Use the App to Make a Measurement