Table of Contents
Advertisement
Graph max level, Graph min level (All views)
l
SLM view and List view: Define the range (maximum and minimum levels) for the bar graph in dB.
Spectrum view: Define the range (maximum and minimum levels) for the bar graph in dB.
Profile view: Define the range (maximum and minimum levels) for the line graph in dB.
The range that you define should match the dynamics of the signal you are measuring. In other words, it should
include all the sound levels that are present.
Parameter (SLM view)
l
Choose the parameter to display in the area below the bar graph.
Parameter 1, 2 and 3 (List view)
l
Choose up to three parameters to display as a list below the bar graph. You do not have to define all three,
choose None to leave a list item blank.
Display
l
Enable or disable the display.
About Data View
About data view displays information about the instrument with which you are measuring. It can also include the loc-
ation of the instrument (latitude and longitude) using GPS (global positioning system).
To enable latitude and longitude coordinates in the About data view:
1. Enable Service mode on the instrument.
a. Press
b. Go to: System settings > Advanced settings > Service mode.
c. Select Enabled.
2. Using the instrument or the mobile app, go to: System settings > Advanced settings > GPS location.
3. Select Enabled.
✐ Note: To enable latitude and longitude coordinates in the About data view using the mobile app, Service mode must
be enabled on the instrument.
briefly to open the menu.
Set up the
53
Instrument:
Display Settings
Advertisement
Table of Contents
