Connect The Mobile App To The Instrument - B&K 2245 User Manual

3. Enter the IPv6 address of your instrument.
To find the IPv6 address, go to: Menu > Network settings > Wi-Fi settings or Ethernet settings > IPv6 address
✐ Note: Enter the address in brackets, for example: [2701:db8:424d:d15::1a2f::].
4. Tap Done.
5. Tap the instrument listing to connect.
✐ Note:
If you are unable to connect, try adjusting the firewall settings on your router.
l
You can also test the setup using the PC app. Click
l
instrument from IP.

Connect the Mobile App to the Instrument

The mobile app connects to the instrument via Wi-Fi® and Bluetooth®.
What you will need:
The instrument
l
An iPhone or iPod with the mobile app installed
l
Connect the Mobile App to the Instrument
1. Connect the mobile device and the instrument to the same local network.
You have two options:
Connect the instrument and the mobile device to your current network
l
Set the instrument to act as a hotspot then connect the mobile device to the hotspot
l
2. Enable Bluetooth on your mobile device as per the manufacturer's instructions.
3. Open the mobile app.
Before the mobile app connects to an instrument, it will open to a list of the instruments it detects sorted by nick-
name, type and serial number.
4. Tap on your instrument to connect.
Hint: Give the instrument a nickname (System settings > Network settings > Nickname). A nickname can
make it easier to find your instrument in a list. Also, nicknames are fun!
Get Started: Connect the Mobile App to the Instrument
to open the import dialog then click
26
and select Add