conditions. The fuse resets automatically within a few seconds after the overcurrent condition is
removed.
Power rating: +4.65 to +5.25 VDC at 1 A (0.75 A for the DAQCard-6715)
The +5 V line on the connector of the DAQCard-6715 is fused at 0.75 A. However, the actual
current available can be limited below this value by the host computer. NI recommends limiting
current from this line to 250 mA.
Caution
other voltage source on the AO Series device or any other device. Doing so can
damage the device and the computer. NI is not liable for damage resulting from such
a connection.
Never connect these +5 V power pins to analog or digital ground or to any
TitleShort-Hidden (cross reference text)
© National Instruments | 2-11