Table of Contents
Advertisement
Chapter 1
DAQ System Overview
Safety Guidelines
Operate the device only as described in this document.
Caution
avoid injury, data loss, or a system crash.
Caution
manner not described in this document. Misuse of the device can result in a hazard.
You can compromise the safety protection built into the device if the device is
damaged in any way. If the device is damaged, contact National Instruments for
repair.
Caution
document. Use the device only with the chassis, modules, accessories, and cables
specified in the installation instructions.
Caution
device. Do not operate the device without verifying that the cover is correctly
attached and the device is completely closed.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with radio
and television reception and prevent unacceptable performance degradation, install and use this
product in strict accordance with the instructions in the product documentation.
Furthermore, any modifications to the product not expressly approved by National Instruments
could void your authority to operate it under your local regulatory rules.
Caution
shielded cables and accessories. Do not use unshielded cables or accessories unless
they are installed in a shielded enclosure with properly designed and shielded
input/output ports and connected to the product using a shielded cable. If unshielded
cables or accessories are not properly installed and shielded, the EMC specifications
for the product are no longer guaranteed.
1-2 | ni.com
This icon denotes a caution, which advises you of precautions to take to
The protection provided by the device can be impaired if it is used in a
Do not substitute parts or modify the device except as described in this
You must have all covers and filler panels installed during operation of the
To ensure the specified EMC performance, operate this product only with
Advertisement
Table of Contents
