Waste Electrical And Electronic Equipment (Weee); Safety Guidelines - National Instruments NI USB-6525 User Manual And Specifications

CE Compliance
Refer to the Declaration of Conformity (DoC) for this product for any additional
Note
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification
appropriate link in the Certification column.

Waste Electrical and Electronic Equipment (WEEE)

EU Customers
center. For more information about WEEE recycling centers and National Instruments
WEEE initiatives, visit

Safety Guidelines

Operate the hardware only as described in these operating instructions.
Caution
© National Instruments Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
• 73/23/EEC; Low-Voltage Directive (safety)
• 89/336/EEC; Electromagnetic Compatibility Directive (EMC)
, search by model number or product line, and click the
At the end of their life cycle, all products must be sent to a WEEE recycling
ni.com/environment/weee.htm
The following section contains important safety information that you must
follow when installing and using the USB-6525.
Do not operate the USB-6525 in a manner not specified in this document.
Misuse of the device can result in a hazard. You can compromise the safety
protection built into the device if the device is damaged in any way. If the
device is damaged, contact National Instruments for repair.
Do not substitute parts or modify the device except as described in this
document. Use the device only with the chassis, modules, accessories, and
cables specified in the installation instructions. You must have all covers
and filler panels installed during operation of the device.
Do not operate the device in an explosive atmosphere or where there may
be flammable gases or fumes. If you must operate the device in such an
environment, it must be in a suitably rated enclosure.
If you need to clean the device, use a dry cloth. Make sure that the device
is completely dry and free from contaminants before returning it to service.
.
13 USB-6525 User Guide and Specifications